How to draw a roof plan in autocad

how to draw a roof plan in autocad

Drawing an Architectural Roof Plan

Jun 30,  · In this tutorial I will explain how to draw and draft a hip roof plan. I use AutoCAD to do this, but you can use any 2D drafting package, or even pen or penc. Basic & Easy How to draw a roof plan in AutoCAD Tutorial - Hip Roof Plan Part 1. Below is both the file and video tutorial on YouTUBE on how to draw a roof plan in AutoCAD. This video will take you through how to work out where the hips, valleys and ridges are located on a roof plan. This tutorial uses AutoCAD to explain how to draw the roof plan, but you can use any 2D CAD software or even a pen .

Go to Solution. Are you drawing a Roof Slab or a Floor Slab? What Display Configuration do you have set current? But the slab does show, because the Above Cut Plane Outline component is turned on. Not sure if that is a defect in my specific installation, or in the program in general. The Circle option always places at an elevation of 0.

I need to check gow on a different computer, as there also seem to be missing prompts for some of these CReate Type options. I was able to reproduce the issue on my work computer, although at least here I got the missing prompts still no prompt for height after choosing a CReate type. I'm just checking in to see if you need more help with this. If so, please click Accept as Solution on the posts that helped you so others in the community can find them easily.

Turn on suggestions. Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type. Showing results for.

Search instead for. Did you mean:. This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or how to improve kidney function uk caused by the trust placed in the translation service.

Back to Topic Listing Previous Next. Message 1 of 5. Message 2 of 5. Message 3 of 5. Message 4 of 5. Message 5 of 5. Yes his solution, and another helped me David has helped me on a few other problems thank you.

Post Reply. Share this discussion:. Can't find what you're ddraw for? Ask the community or share olan knowledge.

Post a question. Get an answer.

In View Controls, select the Top. It is easier to snap to the outside edges of the building in plan view. In the Home tab, in the Build panel, click Roof to start the roofadd command. In the Properties palette, specify the Shape and an Overhang distance. Specify points on perimeter of the external wall. Select an isometric view to show the roof in 3D. Draw a closed 2D polyline in the shape of the intended roof, in the location where you want to place the roof. Open the tool palette that contains the roof tool you want to use. (You may have to scroll to display the desired tool.) Right-click a roof tool, and click Apply Tool Properties to Linework and Walls. Open the tool palette that contains the roof tool you want to use, and select the tool. Alternatively, you can click Home tab Build panel Roof Slab drop-down Roof. On the Properties palette, select Single slope for Shape. In the drawing area, specify the first point for the first roof edge. Specify the second point to complete the first sloped roof edge.

There are several different parts of a set of house or building plan: The floor plan or plans, electrical plan or plans, the exterior views or elevations, the basement or foundation plan, a floor framing plan, a site plan. Also included would be: sectional details, kitchen and bathroom cabinet details, Heating Ventilation and Air Conditioning plans H. The roof plan is sometimes overlooked on some plans but it is a very important feature to a complete set of plans. A roof plan is a view from the top of the house that shows the geometry in flat view of a roof.

Drawing a roof plan isn't a difficult task if you already have a grasp of basic drafting. This type of plan is derived from a floor plan and the exterior elevations views of the house. If you are using a drafting board, it's a simple matter of placing the completed floor plan or plans under a transparent sheet of paper, tracing the perimeter exterior walls, and then measuring beyond those walls using an architectural scale to where the overhang fascia of the house will be.

Then projecting lines from the exterior views you can determine where one part of the roof line comes together with the other roof lines in peaks and valleys. In a CAD system, we would do the same thing as using a drafting board.

A line would be drawn around the parameter of the home, and then offset the distance of the overhang. You would then measure to each individual peak of the roof and draw a line representing it. Then, if the roof has more complexity, valleys, crickets little roofs that shed water from a possible water or snow trap , and shed roofs would be drawn using the same method.

Once this drawing is completed, it can be used to draw a rafter plan showing how the roof system goes together and give us the right geometry to make sense of the roof construction. Some drafters make their living drawing specialty plans like the roof, electrical, plumbing, and HVAC plans by hiring themselves out to designers and architects.

This saves these professionals from having to draw the extra complex items on the plans in order to spend more time designing. Your email address will not be published. Leave a Reply Cancel reply Your email address will not be published.

Iconic One Theme Powered by Wordpress. Sorry, your blog cannot share posts by email.



More articles in this category:
<- What does mhn stand for - How to play universe at war->

2 thoughts on “How to draw a roof plan in autocad

Add a comment

Your email will not be published. Required fields are marked*