How to make a pendant light from a wine bottle

how to make a pendant light from a wine bottle

Make a Hanging Light Out of a Wine Bottle

Mar 04,  · Wine bottle pendant lights are one of those Pinterest projects that every wife seems to love and every husband insists he can make, but never does. Trust me. Oct 24,  · Let's Connect! kristinfrey.com Blade for This Project: kristinfrey.com

We wanted to use a fairly heavy Baileys bottle for this how to insert tampon pictures, so we ended up not using the light fixture that came with the kit. This was our very first pendant makee project and we used the kit as a guide pendnat help us assemble the light.

Nick took apart the base lamp so he could feed the wires through the bottle. The liht step was to drill a hole in the bottle cap and the Baileys bottle itself.

After feeding the wires through the cap and the bottle, Nick attempted to attach the original light fixture. Luckily we also purchased a separate light fixture that we used instead. We were able to secure the wires using standard screws. On the top we secured the fixture itself to the aa cord.

This gave winf additional support for the weight of the bottle. We put a bulb in the fixture and what do tuna fish prey on a plug in cord to test out our new pendant lamp.

The result was quite spectacular. Not only did the bottle hold upright, but the light is shining through perfectly to illuminate the valley scene on the too label. Stay tuned, we will be making another pendant light in the near future. Maybe a three string pendant light using mak variation of flavored vodka bottles.

Awesome idea… Biggest issue I run into is making holes in the bottles! Wat do you recommend and where cam I get it? We live in Boston. Hi KC, thank you for leaving us a comment. Nick uses a 2 in. You might be able to find a large enough drill bit or hole saw at your local hardware store as well.

Good luck! I followed the link and saw your bottle. For your paticular bottle I think it would be easier to just take the bottom off. You could always use the bottom decorated rose part for a coin dish or something.

Which is easier and is one way better than the other? Mark, Good question. I actually prefer cutting the bottom off. It allows easier access to the bulb and gives off more light then the drilled hole. It will be a matter of personal preference for you. Your email address will not mmake published. Notify me of follow-up comments by email. Notify me of new posts by email. Skip to content April 24, Decorated Bottle Light with Copper and Beads. Beth, I followed the link and saw your bottle.

Best how to draw eyes with pencil luck. Let us know how it turns out fom you. Leave a Reply Cancel reply Your email address will not be published. DIY Bottle Crafts. Tips for drilling a Glass Bottle.

All Rights Reserved.

Kitchen Organization Boot Camp

This is such a fun pendant light idea! You can make it from a recycled glass bottle. The project is from Rachelle at Adventures in Creating , Thanks for linking up to the party!! I decided that it was time to replace my star lamp that I wired long long ago:. Cassity started Remodelaholic with her husband, Justin, to share their love for knocking out walls together.

She is an interior designer, wife, and mother of two. She and Justin have remodeled three homes from top to bottom and are working on their fourth. Making a house a home is her favorite hobby. I passed it along to a friend that has a very interesting place. It is made with colored bottles in the walls and different places in the cottage. She calls it the "Mermaid Cottage".

Thanks from Sigrid at Kast Fabrics. Loved the idea!! Going to use them as pendent lights on each side of my bathroom mirror above a pedestal sink. Was looking for green pendent lights and came across your article.

Very Awesome idea! I think you should tell people to unplug the Dremel Tool before cooling it in water. A lot of folks might not think of this with a shocking result! Instead of using the method you used for cutting the bottle, I would suggest using something that is much safer, easier, and makes a cleaner cut. The website below is a good place to start! Hope this helps! Hi great article. Im trying to make lights out of Jack Daniels bottles so I need to cut the bottom off with a grinding disc please could you let me know what type of grinding disc you are using.

I am going to try this as I love working with my Dremel…But I think I am going to put me a quarter size washer on the cord so that when i pull the light cord through the top it will stop at the washer …eliminates the knot in the cord and the light should hang more straight…just thought that it might work better …. Neat idea but the result just looks like… broken wine bottles and wires hanging from the ceiling.

If it has a cork put it back in and drill a hole for the wire same with a stew top then there is no need for a knot in the wire.

Ack, this is horrifying. Getting glass dust in your lung is very, very bad. That little band of tape does exactly zero to help. Advising people to do this is reckless and dangerous. Remodelaholic is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.

Please see our full disclosure here. All Gardening Plans on Sale! Click To Shop. Pinterest Facebook Twitter. I still like it and will probably find another home for it but I have been itching to make a light out of one of these:. What is the deal with this girl? Well I ended up with quite a few of them after I made my wine glasses and citronella candles ; I told everyone I knew to save their wine bottles for me and I now have a pretty good collection.

So I had to do something with them! So I came up with this:. Like them? I love them! They are my new favorite project I have done. Want to make some of your own? You can! All you need is:. Wine Bottles I used the large ones. Pendant light Kit.

Safety Goggles. First I soaked my wine bottles in warm soapy water to take the labels off. Then taped off a section on the bottom and drew a straight line along the tape. This indicates the line I am going to cut along. Next I was ready to cut. Remember to wear safety goggles and a mask! Take your time and let the tool do the work. Trust me I tried! Making some progress! I like to keep the tape on the whole time to keep any glass shards in check.

Also remember to periodically dip the Dremel in water and spray some on the glass to keep both from getting to hot. The Dremel can over heat and the glass could crack if not.

Yay success!! Once your are done with this step you can use the polishing bit to make the edge extra smooth and shiny. I had 2 different wiring kits, the one from Ikea and the one I already had. I was hoping I could just slip the plug through the neck of the bottle and be done with it but the plug is to wide, so it was off to plan B and C. The wiring kits were different so I had to use two different ways of wiring the bottles.

For the first one I was able to take the light housing apart, being sure to keep everything in the same order. Once I had it all apart I just ran the wire through the neck of the bottle, then put the housing back together. Once it was run through I tied a knot in the wire so the bulb would hang inside the bottle in the position I wanted. I had bought a wireable plug from Home Depot and used that. To attach the wire to the new plug, I had to cut the old one off.

Then I ran the wire through the neck of the bottle. Then just run the wire through the slot of the plug and snap it closed. Done, easy! I love the light they give off! A few close ups:. And one shot of them off:. So what do you think? Do you think this is something you would want to make? It can be. I'll show you how.

Thanks Dave. That sounds like it could work, Maude! Let us know how it goes for you! Leave a Reply Cancel reply We love hearing from fellow Remodelaholics, so let us know what you like about this and leave any questions below in the comments.

If you have followed a tutorial or been inspired by something you have seen here, we would love to see pictures! Submit pictures here or by messaging us over on Facebook. Recipe Rating Recipe Rating. Meet The Team. Privacy Policy Remodelaholic is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.



More articles in this category:
<- How to dance like michael jackson dvd - How to print screen a page from the internet->

3 thoughts on “How to make a pendant light from a wine bottle

Add a comment

Your email will not be published. Required fields are marked*